jQuery( document ).ready(function() { jQuery(".lightbox a").attr("rel","prettyphoto"); });
 

The world of Implant Dentistry.

Unlimited Implant Solutions.

Implant systems

The fitting implantology concept for every indication.

One-piece or two-piece, titanium or ceramic, precision hex or conical torx – we offer you the full range of modern implantology. The BoneTrust® implant systems are designed in compliance with the requirements that a successful implantology concept has to meet today: practical applicability, safety and cost effectiveness. We provide exclusively high-tech products “Made in Germany”, based on highest quality standards and state-of-the-art production processes.

All implant lines have an ultrapure surface and are all, without exception, manufactured using biocompatible titanium grade 4 or high-strength zirconia ceramic. No matter which BoneTrust® implant you choose – it will be a good choice.

BoneTrust® plus hex

The universal implant with the internal precision hex and crestal thread split.

Proven thousand times over. Through the special self-tapping screw design with crestal “thread split”, the BoneTrust® plus implants guarantee atraumatic insertion with optimal primary stability in all bone qualities.

The interaction of the homogeneous, ultrapure BoneTrust® implant surface in combination with harmonized platform switching ensures a secure implant-bone bond over the long term. A very stable, 2.3 mm precision hexagon socket with a minimized degree of freedom is used as an abutment connection, which in conjunction with the long guide surfaces effectively prevents screw loosening.

Crestal “thread split” reduces cortical stress peaks
Implant body made of pure itanium grade 4, highly pure surface
Innovative cutting groove design facilitates insertion
Abutment connection available as internal hexagon socket or cone/torx.
BoneTrust® plus cone - Zahnimplantat
Crestal “thread split” reduces cortical stress peaks
Implant body made of pure titanium grade 4, highly pure surface
Innovative cutting groove design facilitates insertion
Abutment connection available as internal hexagon socket or cone/torx

BoneTrust® plus cone

The universal implant with the conical torx and crestal thread split.

Proven thousand times over. Through the special self-tapping screw design with crestal “thread split”, the BoneTrust® plus implants guarantee atraumatic insertion with optimal primary stability in all bone qualities.

The interaction of the homogeneous, ultrapure BoneTrust® implant surface in combination with harmonized platform switching ensures a secure implant-bone bond over the long term. A combination of a non-constraining internal cone (11°) and a precision torx (anti-rotational mechanism) is used as an abutment connection. The form-fitting and sealed connection eliminates micromovements and is characterized by optimal handling and simple positioning of the superstructure components.

BoneTrust® sinus

The rescue implant for the sinus lift – primary stability when bone availability is limited.

The BoneTrust® sinus implant, which was developed in close collaboration with Dr. Kay Pehrsson (Haranni Clinic, Herne), enables a higher primary stability with reduced vertical bone availability due to its special design with a reduced thread portion. As a result, a single surgical procedure (augmentation and concurrent implantation) is possible in many cases, even with bone availability of less than 5.0 mm in the sinus region.

The absence of sharp-edged cutting grooves and the rounded apical design prevents damage to the Schneiderian membrane. The 12 mm long implant is available in diameters of 4.0 mm and 5.0 mm.

Short thread for the ideal primary stability with a short bone level.
Implant body made of pure titanium grade 4, highly pure surface
No mobilization of KEM-particles through cutting grooves
Protection of Schneiderian membrane through apical rounding
Rotation-proof augmentation area with optimized CAD/CAM design
Machined area for optimal soft tissue adhesion
Crestal threading to prevent tension peaks
Laser-structured, rough BoneTrust® surface, comparable to the BoneTrust® plus surface
Laser-cut cutting grooves
Completely naturally white implant body

BoneTrust® balance

The laser-structured ceramic implant with the click.

BoneTrust® balance is the biocompatible zirconium ceramic alternative for restorations in which titanium implants cannot or are not to be used. The design of the screw corresponds to that of the BoneTrust® plus titanium implants.

An innovative laser procedure ensures that a roughness of the implant surface is achieved that corresponds to that of the BoneTrust® plus titanium implants. Gingiva formers, impression caps and the provisional crown superstructures are simply placed on and snap into place with a click. This results in a considerable acceleration and simplification of treatment processes.

BoneTrust® balance – the ceramic and logical addition to the BoneTrust® implant system.

BoneTrust® one

The single-piece implant for economic CAD/CAM restorations.

The single-part BoneTrust® one implant was specially developed for social indications and restorations with CAD/CAM-produced superstructures. The diameter of only 3.0 mm makes it universally applicable, especially for older patients with advanced atrophy. BoneTrust® one offers the surgical advantages of the two-piece BoneTrust® plus implants and enables very cost-effective prosthetic restoration concepts.

A large number of prefabricated superstructure components for fixed and removable dentures are available. The delivery includes a universal abutment, which can be used as open impression posts and for prosthesis fixation.

Outer cone with hexagon developed for restorations with CAD/CAM
Crestal “thread split” reduces cortical stress peaks
Implant body made of pure titanium grade 4, highly pure surface
Innovative cutting groove design facilitates insertion
Cylindrical form
Fine thread
Implant body made of pure titanium grade 4, machined surface
Available in length 11.5 and 13 mm
Conical form
Tension screw
Implant body made of pure titanium grade 4, deep structured surface
Available in length 10 and 13 mm

BoneTrust® mini + mini plus interim implants

The two-piece, screwed interim implant made of pure titanium grade 4.

Unique, two-piece implantology concept for the interim restoration. In collaboration with Prof. F. Khoury and the Schloss Schellenstein private dental clinic, a two-piece design was developed, which enables restoration with prosthetic components with the aid of a of screw connection. The implant, measuring just 2.3 mm and 2.5 mm respectively, is made of pure titanium grade 4 and is available in various lengths.

The system offers a wide range of prosthetic options thanks to a large number of prefabricated superstructures. In addition to straight and angled abutments, scan and impression components, laboratory implants and polymerisation caps are also available for the quick and easy production of interim bridges. The prosthesis is fixed by means of corresponding screwed snap attachments. The workflow is based on classic implant systems.